Automation
Course details
Lectures
:
14
Quizzes
:
2
Level
:
Intermediate
- Description
- Reviews
- Grade
Focus on Hayward Omni and Jandy automation setup
Please, login to leave a review
Hayward Automations
-
1
Omni Logic 101 -
2
Pro Logic Trouble shooting GuidePro Logic Trouble shooting Guide
Review the guide and answer the quiz questions in the next Lesson
-
3
Omni Logic Trouble Shooting Quiz -
4
Installation and Programming Omni LogicThis lesson will cover installation and programing the Omni logic board
-
5
Back Up ConfigurationWhy should you backup your configuration?The reason you should backup your configuration is because it is stored within the controller of your Omni Automation system. If a hardware failure causes you to replace the controller, then it will help you get things back up and running as quickly as possible.Recommended USB drive When backing up your configuration, for best results, we recommend using a SanDisk USB drive that's no larger than 16 gigabytes.How to install the USB drive on an Omni Logic.Now, that you've removed the dead fun from your Omni logic, you can insert the USB drive into the USB port. The USB port is located on the left side of the display, just below the Ethernet cable now. That the USB drive has been installed. You, can backup your configuration. How to install the USB drive, on an Omni PL Omni hub or VS Omni. If your system is an Omni PL and Omni hub or a VS Omni you're going to have a controller that looks like this. The USB port is located on the bottom of the controller underneath of the first whether cover how to backup your configuration.To backup your configuration, you're going to look for the Config icon on the right hand side of the screen. If you do not see it on the first page of icons, tap the right arrow to scroll through the icons until you do find it. Once you have located the config icon, tap on it to bring up the Configuration menu. On the left side of the configuration menu, you're going to look for and tap on Backup.This will provide you with two options. You have backup configuration to USB, which will only be available once the Omni has detected that a USB drive has been inserted into the USB port, will also have internal configuration backup. However, it is always recommended to backup your configuration to a USB.Go ahead and select backup configuration to USB to highlighted, and then you're going to press Check.The backup process is done very quickly.
-
6
Hayward Actuator Cam
In this session we're going to talk about how to install and Kam a GVA 24 valve actuator.
Starting Course
Jandy Automations
-
12
FPA Aqualink 18 Ch Remote Installation ENG-ADACC
Installing the Handheld remote
-
13
Jandy IAquaLink complete installation and connection
Installing the Jandy IAquaLink pool controller is a straightforward process that brings convenience and automation to your pool management. With this innovative system, you can remotely control and monitor your pool's functionalities from anywhere using a smartphone or tablet.
